New Composite ARF SU27
#651
Flaps
We are flying mine with full flaps 5 cm down from fuse side of flap. In looking at videos some appear to be lowering flaps beyond this? I wonder if any issues blanking out tailerons?
thanks
thanks
#652
In the beginning (before i got used to the 5cm flaps), I use to deploy the flaps only on final because it was so hard - the plane just wouldn't turn.
#654
We all use maximum flap angle SU-27 and 30, I don’t have a cm distance without checking, but it’s way more than 5cm-there is no blanking issue I have experienced in the SU-27 I have flown.
The following users liked this post:
Auburn02 (06-28-2021)
#660
If you need more reason to press the 'buy now' button... check out this video. The CARF SU27/30 is way more maneuverable than the other brand:
#662
My Feedback: (8)
Join Date: Sep 2002
Location: Ste. Genevieve,
QC, CANADA
Posts: 69
Likes: 0
Received 0 Likes
on
0 Posts
I need some info on the new SU27 for a friend that has just received one. there is no info that comes with the model in regards to the suggested
servo's required or the centre of gravity measurements. we are hoping someone out there can supply this info for us. the dealer in oz does not know and comp arf do not seem to answer emails
regards
ken
servo's required or the centre of gravity measurements. we are hoping someone out there can supply this info for us. the dealer in oz does not know and comp arf do not seem to answer emails
regards
ken
[email protected]
#664
My Feedback: (92)
Thrust tubes not fitting into vectors
The outer diameter of my thrust tubes is a couple mm less than the inner diameter of my vectors (photo). Forcing the tube into the vector might be possible but would likely distort one of both tubes. Has anyone else had this same issue and if so what did you do?
Phil
Phil
#665
Anyone with Down&locked LG has try another brand of controller?
I have a friend using the first batch of electric gear from them and it has a xicoy controller, he has have allways problems with this gear, any one has done any improvment on Controller or Retract motors??? can an Electron Motor be fitted????
I have a friend using the first batch of electric gear from them and it has a xicoy controller, he has have allways problems with this gear, any one has done any improvment on Controller or Retract motors??? can an Electron Motor be fitted????
#666
My Feedback: (82)
Hi everyone, I wanted to get your opinion on the original early version kits with Matrix gears. There is a older new never flown early version kit with matrix gears available here locally, and i wanted to know your experiences with the reliability of the gears, Does it retract without any constant issues? I don't mind shimming a little or cut any scale pieces to make them work, more concerned on the design of the unit, especially since i don't think i can get any more parts for it.
I have a few modelers telling me that they are problematic. Thank you in advance
I have a few modelers telling me that they are problematic. Thank you in advance